Causes of sinkholes

Sinkholes opening up in the middle of cities.

A huge sinkhole swallowed a bus, killing six people in Northwest China in January 2020, sparking an electrical explosion and leaving several missing. Several people disappeared as the sinkhole spread and 16 people were taken to hospital.

Sinkholes are not uncommon in China and experts cite the country's rapid pace of huge construction work as one of the triggers.

Watch the BBC footage of the latest incident.

Dr. Clive Edmonds is a geotechnical specialist and has studied sinkholes for the past 30 years.

"The main trigger for sinkholes is water," says Dr. Edmonds. "In 90% of sinkhole cases, water saturating the mineral deposits is the main trigger, known as Karst processes.

"Sinkholes happen when a layer of rock underneath the ground is dissolved by water. In regards to China and their sites, I know there there are some Karst problems with limestone deposits.

"Sinkholes depend on geometry, some rocks are more soluble than others - salt deposits for instance dissolve more quickly. Gypsum for instance is a very soluble rock. Chalk and limestone deposits may take thousands of years to dissolve but when new cavities occur they can cause spectacular sinkholes."

"Human development can contribute greatly, especially construction work in urban areas where you may have dense development with roadworks, etc, as in the case of China. The surface becomes impermeable with water collecting over time in drains and sewers - water starts leaking into the ground."

"There are warning signs you can spot. First indicators are dips and depression in the ground surfaces, deepening with tiny cracks in pavements or buildings for instance, leading to buildings showing slight movement. "

Tunnelling into water filled cavities or where water bodies can flow catastrophically into an excavation are particularly hazardous.

"In the UK any such instances have been caused by small cracks in the ground leading to the onset of building movement and then a breakdown in the water utilities or leak of a mains water pipe or a sewer eventually draining water into the ground.

In the UK there has been a long history of mining and water abstraction, which in some areas has left a legacy of man-made cavities. The term sinkhole is, in the UK, often extended to cover the collapse of ground into such man-made features.

But predicting a sinkhole collapse is not easy as there can be very little surface evidence of the features.

Tony Bracegirdle is a senior partner of the Geotechnical Consulting Group.

"There are seldom warnings in urban areas," says Tony, "although sometimes sinkholes develop slowly to the extent that there is sufficient time to restrict access. Sinkholes tend to focus in specific geological and topographic conditions and so the hazard can be reasonably quantified in areas where there is a history of recurring sinkhole activity"

"The most common response in high-risk locations is to design works that are insensitive to potential sinkholes," says Tony, "to control surface water and to take additional precautions to limit water loss from drains and services."

What can civil engineers do to prevent sinkholes?

[edit] About this article

This article - written by ice.org.uk Andrew Panos of the Institution of Civil Engineers (ICE) - previously appeared on the ICE website in January 2020 under the title 'What are the causes of sinkholes'. It can be accessed HERE.

Other articles by the ICE on Designing Buildings Wiki can be accessed HERE.

[edit] Related articles on Designing Buildings Wiki

• Contingency plan.
• Design risk management.
• Health and safety.
• Interface risk in construction.
• Method statement.
• Near miss.
• Principles of prevention.
• Project risk.
• Retained risk.
• Risk assessments and method statements.
• Risk assessment.
• Risk feedback.
• Risk management.
• Risk register.
• Safety management.
• Surfside condo collapse: climate change demands adaptation in design and approach.
• Value management.
• What is a hazard?

--The Institution of Civil Engineers